Waterproof Deck Coating
Concrete Coatings
Epoxy Flooring

RESINYTE™ “TS” System

Troweled Slurry Epoxy Floor Coating
3/16’’-1/4’’ ’

The Resinyte-TS System is a 100% solids, high-build epoxy floor coating designed for flooring applications that require extreme durability. The system incorporates an epoxy enriched slurry that provides an extremely durable intermediate base coat that in turn acts as a receiving coat for a variety of finish options.
Select from a Solid Color, Acrylic Chip, or Colored Quartz Broadcast finish to fit your project requirements.

>Application Instructions
>Manufacturer Specifications
>System Data Sheets
>Brochure

Common Applications

  • Industrial
  • Bathrooms/Washrooms
  • Commercial

System Performance

Compressive Strength…………………………10,000 psi
(ASTM D579)
Abrasion Resistance ……………………………………09gr
(ASTM D4060)
Impact Load……………………………………………………011”
(MIL D3134)
Applied Load…………………………………………………005”
(MIL D3131)
Adhesion ………………………………………………>400 psi
(ASTM D4541)
Flexural Strength…………………………………4,300 psi
(ASTM C580)
Flammability……………………………Self-Extinguishing
(ASTM D635)
Water Absorption…………………………………………03%
(MIL D3134)
Tensile Strength……………………………………1,640 psi
(ASTM C307)
Microbial Resistance………………………………Rating 1
(ASTM G21)
Surface Hardness………………………………………80-85
(ASTM D2240 Shore D)

System Considerations
Preparation
  • Shot Blast or Diamond Grind
  • RS-Vapor Prime – Moisture Vapor Emission Control Primer
  • RS Membrane – Flexible Epoxy Waterproof Membrane
  • Integral Sanitary Cove Base
Finish Options
  • Standard or Custom Blended Color Quartz
  • Solid Color Quartz
Clear Coat
  • RS-Urethane 100 – Clear Chemical Resistant Urethane
  • RS-Epoxy 200 – “Amber Clear” Novolac Epoxy
  • Appropriate Anti-Skid Additive
 
  Systems | Details | Finish Options | Distributor Locations | Photo Gallery | Contact Us
800.364.0287

© Copyright 2010 Pli-Dek Systems Inc., All rights reserved.