RESINYTE™ “U” System
Aliphatic Urethane System
The Resinyte-U System is a high solids urethane floor coating designed to provide superior durability for
applications that are exposed to ultraviolet rays. The finished system provides a protective surface that
is hard, highly abrasion, chemical, and stain resistant that comply with the stringent California V.O.C regulations. |
>Application Instructions
>Manufacturer Specifications
>System Data Sheets
>Brochure
>Color Chart |
 |
System Performance
Gloss ……………………………………………………………90-95
(60 degrees)
Gloss)……………………………………………………………50-60
(Satin material, 60 degrees)
Hardness …………………………………………………………122
(Konig)
Tabor Abrasion……………………………………30mg/loss
Impact Resistance………………………………160in/lbs
(ASTMD2794)
Flexibility……………………………………………Passes 1/8”
(ASTM D222)
Chemical Resistance (ASTM D1308)
Isopropyl Alcohol……………………………………No Effect
Sodium Hydroxide 50%………………………No Effect
Skydrol………………………………………………………No Effect
Hydrocholic Fluid #83282………………………No Effect
Gasoline……………………………………………………No Effect
Mineral Spirits…………………………………………No Effect
Xylene………………………………………………………No Effect
MEK……………………………………………………Film Softened
Sulphuric Acid 25%…………………………………No Effect
Acetic Acid 25%…………………………………………No Effect
Nitric Acid 25%…………………………………Film Blistered
*Contact Pli-Dek for additional chemical resistance |
|
System Considerations |
Preparation |
- Shot Blast or Diamond Grind
- RS-Vapor Prime – Moisture Vapor Emission Control Primer
- RS Membrane – Flexible Epoxy Waterproof Membrane
- Integral Sanitary Cove Base
|
Finish Options |
- Solid Color, Acrylic Chip Broadcast, Colored Quartz, Aggregate Profile
|
Clear Coat |
- RS-Urethane 100 – Clear chemical resistant urethane
- Appropriate Anti-Skid Additive
|
|
